船舶喷砂房（分段涂装房）

喷砂（丸）房系列产品

船舶分段涂装房-船舶特涂设备

Ship section coating room-special ship coating equipment

1、一套强制性涂装施工规范；目的是保护海洋环境；一次、二次处理Sa2.5级；一种保证涂层目标使用寿命15年施工技术。

2、（边缘园角）2mm；涂层破坏大于2%或25m2,喷砂处理Sa2.5级。

3、（粗糙度）30-75um；表面温度比露点高3℃；干膜厚度320um。

4、（颗粒大小）3、4、5灰尘分布1级；肉眼可见更小灰尘去除。

5、（氯化钠）50mg/m2；500总吨船用海水舱；150m长散货船双舷侧。

6、涂装技术规格书6要素：产品名称、涂层材料、施工方法、膜厚范围、前处理、环境。

7、70%Sa2级（试验不合格底漆）；合格底漆扫砂或高压水清洗。

8、（相对湿度）小于85%。

9、90/10规则：90%达到标准值，10%达到标准值的90%。

1.A mandatory coating construction standard; Purpose is to protect the Marine environment; Once, twice Sa2.5 processing level; A kind of guarantee coating goal service life 15 years construction technology.

2.(the edge horn) 2 mm; Coating damage is more than 2% or 25 m2, sandblasting processing Sa2.5 level.

3.(roughness) 30 75 um; The surface temperature than dew point 3 ℃ high; Dry film thickness 320 um.

4.(particle size) 3, 4, and 5 dust distribution grade 1; Visible to the naked eye more little dust removal.

5.(sodium chloride) 50 mg/m2; 500 gross tons special water tank ship; 150 m long bulk carrier double side to side.

6.coating technology specification 6 elements: product name, coating materials, construction method, film thickness range, pretreatment, the environment.

7.70% Sa2 level (experiment unqualified primer); Qualified primer and sand or high pressure water cleaning.

8.(relative humidity) less than 85%.

9.90/10 rule: 90% to 10% of the value standard of 90%.

根据规范要求，我们的服务机会有这些：

1、我们可以认为仅有涂装房不一定能满足PSPC规范，没有涂装房更不能满足规范；因此没有涂装房的我们可以帮助建设，有涂装房的我们可以帮助完善。

2、15年使用寿命的规范，可能对其它行业有借鉴作用。

3、环境我们可以做到无污染。

4、Sa2.5级意味着高效喷砂和回收系统的使用和改善。

5、粗糙度控制意味着磨料分离装置的要求提高了（保存细颗粒，去除粉尘）。

6、温度、湿度、厚度检测仪器使用率大大提高。

7、盐度、清洁度、灰尘检测大量采购。

8、表面吸尘设备（电动、气动、防爆）大量使用。

9、涂装房照明设施可能需要改善，选择灯具、设计布置、安装施工。

10、为保证环境限制条件：合理的除尘系统、节能的加热系统、可靠的除湿系统成为涂装施工必须设备。

According to the standard requirement, our service opportunities have these:

1.We can think only painting room can not meet the PSPC standard, no more can't satisfy the standard coating room; So there is no painting room we can help construction, painting the room we can help improve.

2.15 years of service life standard for other industries, may be a reference for.

3. we can do no pollution environment.

4.Sa2.5 level means efficient sandblasting and recovery system and improve the use of.

5.Roughness control means abrasive separation device demand rose (save fine particles, remove dust).

6.Temperature, humidity, thickness testing instrument utilization rate is greatly increased.

7.And salinity, cleanness and dust detection in large quantities.

8.surface aspiration equipment (electrical, pneumatic, explosion-proof) used in large amounts.

9.Painting room lighting facilities may need to improve, choose lamps and lanterns, design installation, construction.

10.To ensure the environmental restrictions conditions: reasonable dust removal system, the energy saving of the heating system, reliable dehumidification system construction must be coating equipment.

面对船舶修造行业IMO涂层性能标准(PSPC)的实施，斯特尔机械提供船舶喷砂涂装设备系统整体解决方案及技术支持，为船舶修造行业设计制造完善的船舶分段喷砂房喷漆房，钢板抛丸预处理线，舾装件、舱口盖等船体部件二次分段涂装房，压载舱特涂设备，连续高效喷砂设备及回砂系统设备，精准的砂尘分离装置，环保节能型除尘设备，大中型真空吸砂设备，组合式除湿机，高效暖风机，移动防爆风机，电动/气动/防爆型吸尘设备，高压水清洗设备，温度、湿度、厚度检测仪器，盐度、清洁度、灰尘用检测设备。

Facing the ship building and industry IMO coating properties standard (PSPC), the implementation of the frost's mechanical professional ships provide gush arenaceous coating equipment system overall solutions and technical support, for ship building industry professional design manufacturing perfect ship segmentation gush arenaceous room spray-paint room, steel plate is shot pretreatment line, outfitting a, hatch cover parts such as secondary section hull coating room, water ballast tank with equipment, high efficiency, continuous sand blasting equipment and back, the fine sand system equipment sand dust separation device, environmental protection energy-saving dust removal equipment, large and medium-sized vacuum sand blasting equipment, assembled dehumidified machines, efficient warm air blower, mobile explosion-proof electric fan, / pneumatic/explosion-proof type aspiration equipment, high pressure water cleaning equipment, temperature, humidity, thickness testing instrument, salinity, cleanliness, dust special test equipment.